alfa 156 Δημοσιεύτηκε September 19, 2004 Κοινοποίηση Δημοσιεύτηκε September 19, 2004 Παιδιά βοήθεια. Είχα οδηγούς της widcomm για να στέλνω και να λαμβάνω αρχεία στο V600. Εβγαλα τους οδηγούς και έμεινα με αυτούς που έχει το SP2. To προβλημα είναι οτι ενώ μπορώ να στείλω αρχεία στο v600 δεν μπορώ να λάβω αρχεία απο το v600. Τα windows βρίσκουν το device κανονικα. Ξαναβάζω από πάνω τους widcomm 1.4.2 αλλά αυτοί δεν βρίσκουν το dongle (ταυτόχρονα οι drivers των sp2 βρίσκουν το dongle). Μάλλον επειδή τα windows χρησιμοποιούν κατ αποκλειστικότητα το device. Ti να κάνω? Παράθεση Link to comment Share on other sites Περισσότερες Επιλογές Κοινής Χρήσης
geovass Δημ. September 19, 2004 Κοινοποίηση Δημ. September 19, 2004 Ειχα ακριβως το ιδιο προβλημα και εγω! Δεν καταφερα να βρω λυση στο προβλημα και ξαναεστεισα WinXP SVP1 εκανα κανονικα εγκατασταση το ΒΤ μου και μετα εριξα το SVP2 XP και ειμαι μια χαρα τωρα. Φαινεται οτι κατι συμβαινει με τους drivers BT του SVP2 και μπερδευονται... Παράθεση Link to comment Share on other sites Περισσότερες Επιλογές Κοινής Χρήσης
alfa 156 Δημ. September 20, 2004 Author Κοινοποίηση Δημ. September 20, 2004 Αρχικό Μήνυμα από το μέλος geovass (20 Σεπ. 2004 , 01:29) Δεν καταφερα να βρω λυση στο προβλημα και ξαναεστεισα WinXP SVP1 εκανα κανονικα εγκατασταση το ΒΤ μου και μετα εριξα το SVP2 XP και ειμαι μια χαρα τωρα. Το σκέφτηκα και εγώ αλλα δυστυχώς το φορματ είναι αδύνατον να γίνει τουλάχιστον στην παρούσα φάση. :( Να σε ρωτήσω, κατάφερες ποτέ να ΛΑΒΕΙΣ αρχείο με τα SP2? Παράθεση Link to comment Share on other sites Περισσότερες Επιλογές Κοινής Χρήσης
Hunter Δημ. September 20, 2004 Κοινοποίηση Δημ. September 20, 2004 μπορει να φανει κουλο αυτο που θα πω αλλα ισως να παιζει ρολο το ενσωματομενο Firewall που εχουν τα XP και δεν σε αφηνουν να λαβεις αρχεια Παράθεση Έρωτας: Κορυφαίο ιδιοτελές συναίσθημα, αναφέρεται μόνο στις ερωτικές σχέσεις (όπως δείχνει και το όνομα του). Δίνεις τα πάντα στον άλλο και περιμένεις τα πάντα από αυτόν. Παραδίδεσαι ψυχή τε και σώματι και επιθυμείς το ίδιο από το ταίρι σου. Για μένα ο αληθινός μεγαλειώδης έρωτας, αυτός που θα σταματήσει το χρόνο, είναι πιο σπάνιος και προσωπικά πιο επιθυμητός από την αγάπη. Link to comment Share on other sites Περισσότερες Επιλογές Κοινής Χρήσης
geovass Δημ. September 20, 2004 Κοινοποίηση Δημ. September 20, 2004 Αρχικό Μήνυμα από το μέλος alfa 156 (20 Σεπ. 2004 , 07:20) Το σκέφτηκα και εγώ αλλα δυστυχώς το φορματ είναι αδύνατον να γίνει τουλάχιστον στην παρούσα φάση. :( Να σε ρωτήσω, κατάφερες ποτέ να ΛΑΒΕΙΣ αρχείο με τα SP2? Θα σε γελασω, δεν θυμαμαι. Ειχα τοσα νευρα που δεν δουλευε κανονικα που εκανα ΤΙΣ μαιμουδιες για να το κανω να το "δει" σαν device το dongle αλλα που η μ@λ@κι@ !! Το firewall των XP το εχω απενεργοποιημενο... ;) Παράθεση Link to comment Share on other sites Περισσότερες Επιλογές Κοινής Χρήσης
alfa 156 Δημ. September 20, 2004 Author Κοινοποίηση Δημ. September 20, 2004 Η ΛΥΣΗ στο ΠΡΟΒΛΗΜΑ You will experience a problem if you install Widcomm drivers on a Windows XP installation AFTER SP2 has been applied if you own a device which is supported natively by SP2. The reason for this is because Windows automatically picks up the drivers built-in to Windows rather than using the drivers that come with the Widcomm software. The Widcomm software cannot use the built-in drivers, presumably because that have a different API than WIDCOMM expect. Upgrading to SP2 after installing WIDCOMM software will not cause a problem as Windows will keep on using the WIDCOMM supplied drivers. What you will need to do to install WIDCOMM drivers on a Windows XP SP2 machine is: 1. Remove your Bluetooth dongle from the PC 2. Uninstall youir Widcomm software. 3. In Explorer go to Windows\Inf 4. Rename the file bth.inf to bth.bak After this reboot & then reinstall your WIDCOMM software. REBOOT. You should find everything now works as it did before SP2. By the way, I would definately use the WIDCOMM drivers in preference to those built in to XP, particularly with a SE phone! I'd miss the user interface. Παράθεση Link to comment Share on other sites Περισσότερες Επιλογές Κοινής Χρήσης
geovass Δημ. September 20, 2004 Κοινοποίηση Δημ. September 20, 2004 Αρχικό Μήνυμα από το μέλος alfa 156 (20 Σεπ. 2004 , 19:25) Η ΛΥΣΗ στο ΠΡΟΒΛΗΜΑ You will experience a problem if you install Widcomm drivers on a Windows XP installation AFTER SP2 has been applied if you own a device which is supported natively by SP2. The reason for this is because Windows automatically picks up the drivers built-in to Windows rather than using the drivers that come with the Widcomm software. The Widcomm software cannot use the built-in drivers, presumably because that have a different API than WIDCOMM expect. Upgrading to SP2 after installing WIDCOMM software will not cause a problem as Windows will keep on using the WIDCOMM supplied drivers. What you will need to do to install WIDCOMM drivers on a Windows XP SP2 machine is: 1. Remove your Bluetooth dongle from the PC 2. Uninstall youir Widcomm software. 3. In Explorer go to Windows\Inf 4. Rename the file bth.inf to bth.bak After this reboot & then reinstall your WIDCOMM software. REBOOT. You should find everything now works as it did before SP2. By the way, I would definately use the WIDCOMM drivers in preference to those built in to XP, particularly with a SE phone! I'd miss the user interface. Αψογος ! :D Παράθεση Link to comment Share on other sites Περισσότερες Επιλογές Κοινής Χρήσης
alfa 156 Δημ. September 20, 2004 Author Κοινοποίηση Δημ. September 20, 2004 να'σαι καλά. Ομολογώ οτι οι 1.4.3.4 πάιζουν άψογα, όλα τέλεια μέχρι στιγμής... Ελπίζω να μείνει αυτό το hack διότι οι περισσότεροι όσοι έχουν bt+widcomm+sp2 είχανε widcomm πριν βάλουν τα sp2. Με τα πρώτα φορματ και clean install των sp2 θα αρχίζουν τα προβλήματα και threads.... και τώρα που εξαγοράστηκε η widcomm δεν βρίσκεις πληροφορίες πουθενά ουτε Updates. Ας είναι καλά ο κύριος Google που μετά από αρκετό ψάξιμο βρήκα αυτό το hack. Παράθεση Link to comment Share on other sites Περισσότερες Επιλογές Κοινής Χρήσης
harryal Δημ. October 9, 2004 Κοινοποίηση Δημ. October 9, 2004 tin epatha kai egw me to sp2... mia erwtisi.. apo pou mporw na katebasw tin ekdosi 1.4.3.4?? Παράθεση Link to comment Share on other sites Περισσότερες Επιλογές Κοινής Χρήσης
alfa 156 Δημ. October 10, 2004 Author Κοινοποίηση Δημ. October 10, 2004 emule Παράθεση Link to comment Share on other sites Περισσότερες Επιλογές Κοινής Χρήσης
alfa 156 Δημ. October 10, 2004 Author Κοινοποίηση Δημ. October 10, 2004 να και οι οδηγίες από την ίδια την MS... ------------------------------------------------- http://support.microsoft.com/?kbid=840635 Microsoft Knowledge Base Article - 840635 Cannot install a Bluetooth device after you install Windows XP Service Pack 2 View products that this article applies to. SYMPTOMS After you install Microsoft Windows XP Service Pack 2 (SP2), you experience the following symptoms: * You cannot install a Bluetooth adapter, and you experience one or more of the following symptoms: o If you install a Bluetooth device, the device installation appears to work correctly. However, when you view the devices that appear under Bluetooth radios in Device Manager, the device is incorrectly identified. o If you try to configure the device, you receive an error message that is similar to the following error message: Device not found. * If you perform a slipstreamed upgrade of Windows XP SP2 by using Winnt32.exe, existing Bluetooth devices may stop working correctly. For example, some of the Bluetooth device features may stop working. CAUSE This issue may occur if the following conditions are true: * You install Windows XP SP2 on a computer where the Bluetooth adapter is installed but where the third-party driver for that adapter is not yet installed. Or, you perform a slipstreamed upgrade of Windows XP SP2 on a computer that already has an existing Bluetooth device installed that uses a third-party driver. * The Bluetooth adapter has a Vendor ID (VID) or a product identifier (PID) that matches both a third-party Bluetooth stack and the Bluetooth stack that is included in Windows XP SP2. This issue occurs because Windows XP SP2 automatically installs the device driver that is included in Windows XP SP2 instead of the third-party driver that you want to install. During a slipstreamed upgrade, Windows XP SP2 overwrites the existing third-party Bluetooth driver with the device driver that is included with Windows. WORKAROUND To work around this issue and to successfully install the third-party driver for your Bluetooth adapter, use one of the methods that is described in the following sections. Method 1: Rename the Bth.inf file Rename the %WINDIR%\inf\Bth.inf file to Bth.bak before you install or reinstall the third-party device or stack. When you rename the file, you prevent Windows Plug and Play PNP from using that INF file to install the Bluetooth driver that is included with Windows XP SP2. To rename the file, follow these steps: 1. Click Start, click Run, type %windir%\inf in the Open box, and then click OK. 2. Right-click Bth.inf, and then click Rename. 3. Rename Bth.inf to Bth.bak, and then press ENTER. 4. Install the third-party Bluetooth driver. Method 2: Update the Bluetooth driver in Device Manager To replace the Windows XP SP2 installation of the Bluetooth stack, update the driver in Device Manager. When you do this, specify your third-party driver. To update the driver in Device Manager, follow these steps: 1. Click Start, click Run, type devmgmt.msc in the Open box, and then click OK. 2. Locate the device. 3. Right-click the device, and then click Update Driver. 4. Follow the steps that appear on the screen in the Hardware Update Wizard to specify your third-party driver for the Bluetooth device. MORE INFORMATION When you install Windows XP SP2 on a computer where the third-party Bluetooth adapter driver is already installed, Windows XP SP2 does not overwrite that driver. The exception to this behavior is when you perform a slipstreamed upgrade of Windows XP SP2. However, if you install Windows on a computer where the third-party driver is not installed, or if you perform a slipstreamed upgrade, Windows installs the driver that is included with Windows XP SP2 for the Bluetooth adapter. When you try to install a third-party driver, you are unsuccessful because the Windows XP driver for the Bluetooth adapter is signed. Because the Windows XP SP2 version of this driver is signed, Windows ranks it higher in the Plug and Play scheme than an unsigned driver or a third-party signed driver. The information in this article applies to: * Microsoft Windows XP Home Edition Service Pack 2 (SP2) * Microsoft Windows XP Professional Service Pack 2 (SP2) Last Reviewed: 9/1/2004 (3.0) Keywords: kbDriver kbHardware kb3rdparty kbsetup kbPerformance kbprb kbinfo KB840635 kbAudEndUser kbAudITPRO Παράθεση Link to comment Share on other sites Περισσότερες Επιλογές Κοινής Χρήσης
Hunter Δημ. October 10, 2004 Κοινοποίηση Δημ. October 10, 2004 Αρχικό Μήνυμα από το μέλος harryal (10 Οκτ. 2004 , 01:37) tin epatha kai egw me to sp2... mia erwtisi.. apo pou mporw na katebasw tin ekdosi 1.4.3.4?? μπορεις να βρεις αυτο που ζητας εδω ;) Παράθεση Έρωτας: Κορυφαίο ιδιοτελές συναίσθημα, αναφέρεται μόνο στις ερωτικές σχέσεις (όπως δείχνει και το όνομα του). Δίνεις τα πάντα στον άλλο και περιμένεις τα πάντα από αυτόν. Παραδίδεσαι ψυχή τε και σώματι και επιθυμείς το ίδιο από το ταίρι σου. Για μένα ο αληθινός μεγαλειώδης έρωτας, αυτός που θα σταματήσει το χρόνο, είναι πιο σπάνιος και προσωπικά πιο επιθυμητός από την αγάπη. Link to comment Share on other sites Περισσότερες Επιλογές Κοινής Χρήσης
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.